Draw your exact roof edge trim, drip edge, coping, or rake trim profile on a precision grid — get an instant fabrication quote and place your order without a single phone call.
Most roofing contractors still sketch profiles on paper, photograph them, email the shop, and wait — losing days of job time on back-and-forth that should take minutes.
Hand-drawn profiles get misread by the shop, leading to wrong bends, wasted material, and costly re-orders.
Waiting 24–48 hours for a price on a simple drip edge profile delays job scheduling and ties up your sub-bids.
Clarifying bend angles, leg lengths, and material gauge over the phone wastes time and introduces errors.
Freight for long runs of trim adds up fast — you shouldn't have to call a freight broker just to know what it'll cost.
Trimgy replaces the paper-sketch-and-phone process with a digital drawing tool built on real fabrication constraints.
Every segment snaps to a 1/4-inch grid. Draw your exact drip edge, eave trim, or coping profile with the same precision a brake operator uses — leg lengths, returns, and hem dimensions.
Price updates live as you draw. Choose your gauge and coating — Galvalume, painted Kynar, or stainless — and see the per-linear-foot cost change instantly.
Enter your zip code and get an LTL freight quote calculated on actual pallet dimensions and your total linear footage — before you commit to ordering.
Approve your profile, confirm the quote, and check out with Stripe. Your fabrication drawing is transmitted directly — no re-entry, no interpretation errors.
Organize every roofing job by project. Save trim profiles and reuse them across similar jobs without re-drawing.
Describe the trim you need in plain English — "4-inch face, 1-inch hem, 3/4-inch return" — and let the AI draft the profile for you to refine.
From basic drip edge to complex architectural coping, Trimgy's drawing engine handles any custom profile you can define in straight-line segments.
Here's how a typical roofing contractor uses Trimgy on a commercial re-roof with custom coping.
Sketch coping profile on a napkin on-site and photograph it
Email photo + notes to the sheet metal shop, wait 1–2 days for a quote
Call to clarify dimensions — realize the sketch was misread
Re-send corrected drawing, wait again for revised pricing
Separately call freight broker for shipping cost estimate
Open Trimgy, draw the exact coping profile: 8" face, 4" top, 2" inside leg — snaps to grid, no ambiguity
Set gauge (24 ga. Galvalume), linear footage (340 LF) — instant material price appears
Enter delivery zip, get real LTL freight quote. Total landed cost: visible immediately
Check out with Stripe — fabrication order placed, confirmation in email
Entire process: 8 minutes. No phone calls, no guessing, no back-and-forth.
Roofing contractors use Trimgy to draw the trim profile on a precision grid directly in their browser, select material and gauge, enter linear footage and delivery zip code, and receive an instant quote including LTL freight. Orders are placed via credit card and ship fabricated to the job site. No shop visit, phone call, or quote wait is required.
Trimgy supports any custom brake-formed roof trim profile: coping caps, drip edge (Type C, D, F), rake and gable trim, eave trim, gravel stops, fascia trim, counter flashing, sidewall flashing, valley flashing, head flashing, and specialty transition profiles. If the profile can be defined by straight-line segments, Trimgy can produce it.
Trimgy has no minimum order quantity. You can order as little as 10 linear feet or as much as 2,000+ linear feet of a custom profile. Brake-formed fabrication has no tooling cost and no minimum run, unlike roll-formed products that typically require 500–2,000 LF minimums.
Available materials include galvanized steel (G90), Galvalume steel, Kynar/PVDF-coated steel, and aluminum (.032" and .040"). Available gauges are 26 ga., 24 ga., and 22 ga. for steel. SMACNA recommends a minimum of 24 ga. for coping caps and 26 ga. for drip edge and counter flashing in most commercial applications.